SAFWATRM
Complete treatment, instrumentation and maintenance solutions for reliable, high-performing, tailor-made installations.
Six areas of expertise to meet all your industrial needs.
Design and construction of tailor-made plants: reverse osmosis, ultrafiltration and demineralisation for your process water.
Raw water is almost never usable as-is: hardness, chlorine, dissolved salts and suspended solids scale exchangers and foul membranes. We size the treatment chain from a real analysis of your water and your flow rates rather than from a catalogue — 5 to 20 m³/day for compact reverse osmosis, and up to 150 m³/day for ion-exchange demineralisation, reaching a residual conductivity below 0.2 µS/cm.
Biological treatment plants and industrial effluent recycling, from sizing through to operation.
An effluent is treated for two reasons: discharge compliance, which sets a minimum target, and economics — past a certain volume, treated water becomes a resource again. Activated sludge, MBR/MBBR and polishing filtration are selected according to the real load and how much it varies. Our containerised modular plant covers 50 to 400 m³/day using activated sludge with filtration, with no heavy civil works and relocatable if your site changes.
Filtration, purification and air control systems for healthy, compliant industrial environments.
Effective filtration is built in stages: pre-filters capture coarse particles and preserve the terminal filters, which drives running cost as much as performance. Our systems reach HEPA H13 efficiency — at least 99.95% of particles at the most penetrating size — for air flow up to 10,000 m³/h, with remote monitoring of pressure drop so filters are replaced at the right moment.
Supply, calibration and integration of measurement and control instruments to run your processes with absolute precision.
An installation drifts slowly: a rising membrane pressure, a climbing conductivity, a pH out of range. None of these trigger a shutdown, but they wear equipment and degrade quality. The point is therefore not to add sensors but to install the right ones at the right places, with a calibration plan — an instrument whose calibration is never checked eventually produces a false reading that is trusted.
Preventive and corrective maintenance, spare parts and technical support to guarantee the availability of your installations.
Preventive maintenance does not eliminate failure: it moves the intervention to a moment you choose rather than one you suffer. Corrective work depends mostly on what was prepared beforehand — availability of membranes, resins and filters, whose lead time often exceeds the intervention itself. On a treatment plant, downtime is never confined to the failed equipment: it halts the production it feeds.
Turnkey solutions and support across your entire production chain, from initial study to commissioning.
Four stages, with no change of contact: on-site study and audit, tailor-made design and sizing, construction and installation by our teams, then commissioning with training for your operators. Founded in 2015, SAFWAT brings these six disciplines under one roof, which avoids having to coordinate several suppliers on a single installation. We work in food and beverage, pharmaceuticals, industry and with municipalities, across all of Tunisia — from Tunis to Sfax, Sousse, Bizerte, Gabès and Nabeul.
Ultra-pure water production through high-performance membranes for industry.
Membrane separation for clarification, disinfection and polishing.
Ion-exchange resins for process water, boilers and demineralised water.
Activated sludge, MBR/MBBR and industrial effluent recycling.
Purification and control of air for compliant industrial environments.
Measurement, regulation and process supervision with absolute precision.
Analysis of your needs, constraints and water or air quality on site.
Tailor-made sizing and design of the solution best suited to your processes.
Manufacturing, integration and installation by our qualified engineering teams.
Start-up, training of your teams and a maintenance plan for lasting performance.
Process water and sanitary quality.
Effluent treatment and recycling.
Purified water and controlled air.
Municipal plants & drinking water treatment.
Multi-stage filtration for sensitive production environments.
Modular solution for biological treatment of industrial effluents.
Compact skid for continuous purified-water production.
Demineralized water production for boilers and sensitive processes.
Turnkey design and build for a food-processing plant.
Treatment and reuse of process water for an industrial site.
Filtration system for a controlled pharmaceutical environment.
Ion-exchange demineralization line for steam production.
Instrumentation integration and supervision for plant monitoring.
Long-term preventive maintenance and spare-parts supply.
Founded in 2015, SAFWAT designs, builds and maintains complete water treatment, air treatment and instrumentation solutions for industry. Our team of engineers supports every client with reliable installations perfectly suited to their constraints.
From study to maintenance, a single partner accountable for your project.
Every installation is sized to your processes and constraints.
An experienced team in water treatment, air treatment and instrumentation.
Fast service and close follow-up to guarantee your performance.
SAFWAT — 28 Résidence El Médina, Cité Rabta, Nouvelle Médina, 2063 Ben Arous, Tunisie
Phone : +216 52 387 289 · +216 71 345 773 (Tél/Fax)
Email : contact.safwatrm@gmail.com